Biopolishing Enzyme and Peroxide Killer is a Multicomponent enzyme used for peroxide killing and bio-polishing in the same bath leading to conservation of water, time and energy.This can be used for cellulosic fabric and its blends.It does not show strength loss or shade changes. Biopolishing Enzyme and Peroxide Killer shortens the processing time. As it is a neutral cellulase enzyme it will ensure a higher degree of whiteness than expected acid cellulases for full white fabric. The product to be used in soft flow machine and garment dyeing machine. Properties :- 1)Physical appearance : Light yellow to dark yellow slight hazy liquid ; 2)Ionic nature : Non-ionic ; 3)pH of 1% solution : 5 +/- 1 4) Miscibility : Miscible with water 5) Compatibility : Not compatible with strong cationic products or anionic products 6) Stability : Stable to dilute acids and dilute alkalies Application Key Features 1) Equipment : Jet dyeing machine or garment dyeing machine ; 2 ) Biopolishing Enzyme and Peroxide Killer : 0.6-0.8% (depending on requirement) ; 3) pH : 5.0-6.0 ; 4) Temperature : 50-55 deg.C ; 5) Treatment time : 30-45 min. Check H2O2 residue after 15-20 min. Confirm that it should be nil and follow dyeing as per customer's dyeing procedure. During exhaustion of dye bio-polishing will be also simultaneously taken place for 35-45 min. At the end of 50-60 min, alkali to be added where enzyme gets deactivated and dye get fixed to the substrate or can be deactivated by increasing the temperature to 80 deg.C for 10 mins. Precautions Storage: Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture. Shelf Life: 9 months from the date of manufacturing, if stored under controlled conditions.