Acid Cellulase Enzyme is applicable for garment dyeing machine and jet dyeing machine . It is also suitable for colour fading for denim garments and bio-polishing of knits, fabrics & terry towels. Acid Cellulase Enzyme gives a very good performance on scoured or grey fabric after treatment with the wetting agent. To avoid excess strength loss of garments and materials after bio-polishing, it is recommended deactivation of THIS PRODUCT after the treatment. Application 1. For Biopolishing of cottons and blends in exhaust after pretreatment: Acid Cellulase Enzyme : 0.6%-1% pH: 4.7-5.5 Temperature: 50-60 deg.C Treatment time: 45-60 min Dosage should be based on cotton component only Note : First pH of water to be adjusted to 4.7-5.5 and then Biofeel-PST to be added. After bio-polishing treatment, raise the temperature to 80 deg.C for 10 min. or adjust pH to 10 to terminate action of enzyme. The material can then be finished using chemicals finishes as usual. pH of fabric should be neutral and free from residual peroxide Combined bio-polishing and peroxide elimination can be carried out for cotton knits and terry towels prior to reactive dyeing. Bio-polishing is usually recommended before cationic dye-fixation or cationic softening or optical brightening agent. Absorbency of fabric/garment should be good. Precautions Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture. Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.